Leds; Keypad - ABB RELION REC615 Operation Manual

Section 3
REC615 and RER615 overview
3.2.2
3.2.3
22
• V: Viewer
• O: Operator
• E: Engineer
• A: Administrator
• The content area shows the menu content.
• If the menu contains more rows than the display can show at a time, a scroll bar
is displayed on the right.
The display is updated either cyclically or based on changes in the source data such as
parameters or events.

LEDs

The LHMI includes three protection indicators above the display: Ready, Start and
Trip.
There are 11 matrix programmable LEDs on front of the LHMI. The LEDs can be
configured with PCM600 and the operation mode can be selected with the LHMI,
WHMI or PCM600.

Keypad

The LHMI keypad contains push buttons which are used to navigate in different views
or menus. Using the push buttons, open or close commands can be given to objects in
the primary circuit, for example, a circuit breaker, a contactor or a disconnector. The
push buttons are also used to acknowledge alarms, reset indications, provide help and
switch between local and remote control mode.
1MRS758754 B
REC615 and RER615
Operation Manual