1MRS758754 B
4.1.12.1
REC615 and RER615
Operation Manual
GUID-0F9AA31A-A95D-4839-A2AB-DE670272EFA5 V1 EN
Figure 25:
Single-line diagram with one switch and ANSI symbols
Select the single-line diagram for the default view in Main menu/
Configuration/HMI/Default view.
When single-line diagram is selected as the default view, the first
single-line diagram page is shown when the default view is entered.
The single-line diagram page can be changed using the left and right
push buttons.
Changing single-line diagram symbol formats
1.
Select Main menu/Configuration/HMI/SLD symbol format and press
2.
Change symbol format with
3.
Press
to confirm the selection.
GUID-02F6C094-9B0E-4624-AAD2-780355A3F64B V1 EN
Figure 26:
Selecting IEC as single-line diagram symbol format
or
.
Section 4
Using the HMI
.
51