ABB RELION REC615 Operation Manual page 75

1MRS758754 B
REC615 and RER615
Operation Manual
such as string values, are restored to the original value only after a reboot even though
the edited value is not stored in the flash memory.
1. Click Write to IED after editing parameter values to put the values into
protection relay's database for use.
GUID-88D8CBAE-BC8A-4036-AB47-75653D813073 V1 EN
Figure 45: Writing values to protection relay
The values are not stored to the flash memory.
2. Click Commit to write the values to the flash memory.
• Click Reject to cancel saving settings.
• If the parameter has an edit-copy, the original parameter value is
restored.
• If the parameter does not have an edit-copy, the edited parameter
value remains visible until the protection relay is rebooted.
However, the edited value is not stored in the nonvolatile memory
and thus the reboot restores the original value.
GUID-24B2A9CD-DE5A-4DA0-8B57-18BA7B9E8BF9 V2 EN
Figure 46: Committing changes
Section 4
Using the HMI
67