Hold A Call - Cisco 7910G User Manual

Feature
4 Volume button
5 Hold button
6 Menu button
7 Keypad
8 Handset with indicator light
Operating Your Cisco Unified IP Phone
Place a Call
Use one of the following methods to place a call:
• Lift the handset and dial a number.
• Lift the handset and press the Redial button.
Answer a Call
• Lift the handset.
End a Call
• Hang up the handset.
Redial a Number
To redial the most recently dialed number:
1. Lift the handset.
2. Press the Redial button.

Hold a Call

To place a call on hold:
• Press the Hold button.
To retrieve a held call:
• Press the Hold button.
All manuals and user guides at all-guides.com
Function
Increases or decreases handset volume. Also controls the on-hook ring volume.
Places an active call on hold. Resumes a held call.
Not in use.
Functions like a traditional telephone keypad.
Functions like a traditional handset. The light strip at the top of the handset blinks when
the phone rings and remains lit to announce a new voice-mail message. (Functionality
will vary depending on your message system.)
3