Node; Led Display; Temperature; Version - SHOWTEC Club Par 18 Manual

Club Par 18-1 RGB

11. Node

With this menu, you can set the dimmer curve of your Club Par.
01) Press the MODE button until the display shows
02) Press the SETUP button to open the submenu, then press the UP/DOWN buttons to toggle between
one of the 5 dimmer curves from fast to slow:
03) is linear,

12. LED Display

With this menu you can set the LED Display On or Off.
01) Press the MODE button until the display shows
02) Press Setup to enter the LED Display Menu. You can choose 2 different settings.
03) Use the Up / Down buttons to select:
: The LED display will light all the time.
: The LED display will turn off after 30 seconds.

13. Temperature

With this menu, you can see what the current temperature of the LEDs is.
01) Press the MODE button until the display shows
02) Press the SETUP button to open the submenu, you will see the current temperature

14. Version

With this menu, you can see what version software your Club Par has.
01) Press the MODE button until the display shows
02) Press the SETUP button to open the submenu, you will see the current version

15. Reset

With this menu, you can see reset your Club Par.
01) Press the MODE button until the display shows
02) Press the SETUP button to open the submenu, then press the UP/DOWN buttons to select
03) Press the SETUP button to confirm your choice.
Ordercode: 42652
is from (1 sec- 4 sec. dimming curve).
modes always override Channel 8
.
.
.
.
.
.
.
15
.
.