Table of Contents
Advertisement
Available languages
Available languages
Battery Charging
•
Battery charging must take place when the device is not in use.
•
Charging starts automatically when power plug is connected to 230V wall socket. Green light on the control
box will turn on, once the power plug is connected.
Control box
Wiring:
The door on the control box can be opened with a thumb grip.
1.
Battery outlet.
2.
Hand control connector.
3.
Connector for actuator up/down.
4.
Connector for main cable.
(NOTE: Mains cable must always be connected to the con-
trol box for IP classification to be valid.)
Trouble shooting
If the lifting function cannot be activated, check the following:
•
That all cables are properly and securely connected. Pull out the contact and plug it in again firmly.
•
That battery charging is not in progress.
•
That the battery is charged.
If the device is not working properly, contact your distributor.
If the device makes unusual noises:
•
Try to determine the source of the sound. Take the device out of operation and contact your distributor.
I F U
7
Advertisement
Table of Contents
