DHG SystemRoMedic Bure XL Instructions For Use Manual page 5

Before use:
•
Inspect the packaging for any damage.
•
Check for correct product being delivered.
•
Check to ensure that the device is free from damage.
•
Check if all the parts/components are included in the packaging.
•
Check if all approved accessories are included in the package.
•
Check if Product Quality Approval document is included in the packaging. Save this document for future
contact with manufacturer.
•
Make certain the device is properly assembled.
•
Check lifting function and bottom-frame adjustment function.
•
Check if it is possible to move the device in all directions.
3. Using Bure Walker
Standing up and walk training:
1. Ask the patient to sit on the edge of the bed or chair. Bring out the walking table and place it in front of the
patient. Lock the brakes on the wheels.
2. Ask the patient to place their arms on the armrests. If necessary, ask the patient to move forward on the seat
base so that the patient reaches the handles.
3. Ask the patient to lean forward. To start raising the walking table, press the UP button on the controller. Raise
the walking table to a desired height.
4. Unlock the brakes. Adjust the height of the walking table to a desired position
5. Assist the patient while walk training.
I F U 5