10.3 Quick change button
The quick-change button
possible to switch over fast and conveniently into another enabled unit.
10.3.1 Weighing Units
Enable unit:
Switch over unit:
Disable unit:
34
can be allocated with a unit where, if needed, it is
The unit for quick selection can be set when the
is pressed for the first time.
Press the
button, wait until the display flashes.
Press the
button to select the required unit and
confirm by pressing the ➔ key.
Now the preset units can be changed by briefly
pressing the
Using
button, it is possible to switch over
between the enabled unit 1 and unit 2.
Select menu setting < unit > and confirm on ➔
button.
Wait until the display starts flashing and confirm on
➔ button.
From here on, with the
selected anew.
button.
button, all units can be
TFKB_B-BA-e-2210
key