Display Symbols & Status Leds - Reach PP5099 Manual

Display Symbols & Status LEDs
The RW1700-030APO Loop Interface's LCD screen features status symbols to provid feedback.
Fault Type
- The loop interface (Hub) is energized and in normal operation.
-
In this mode, the loop interface does not communicate with the
The loop interface is looking for its paired wireless devices.
This normally happens when the loop interface has been
-
To see the current status of paired devices, use the system
Battery Fault The battery of one or more devices is low/empty.
Link Fault
Tamper Fault
A general fault is present in the system, loop interface or
General Fault
Fire Alarm There is an active fire alarm on one or more elements.
There is communication with the computer (via the USB debug
USB Connection
RF Communica-
tion Jamming
Start-Up Displays during device power-up. Normal operation.
Isolator
Communication error between internal microprocessors
Bridge Fault
Description
The loop interface is in configuration mode.
fire alarm control panel.
de-energized / re-booted.
status menu.
No connection from one or more devices in.
One or more devices give a tamper message.
element.
port).
Noise on RF communication channels in-use.
Isolators active.
(hardware error).
PP5099/2023/Issue 1
Display Symbol Status LED
- Steady Green
- Steady Blue
- Flashing Blue
Fault LED Blink-
ing
Hub- Fault LED
Blinking
Device - Fault
LED Steady
Hub- Fault LED
Blinking
Device - Fault
LED Steady
Yellow Fault LED
Blinking
Yellow Fault LED
Blinking 1s ON /
2s OFF
Yellow Fault LED
Steady ON
LCD Message:
'Interface Fault'
Page 9 of 27
-
-
-