Connect The Motor And The Board - Renesas RA6 Series Quick Start Manual
Hide thumbs
Also See for RA6 Series:
- User manual (44 pages) ,
- Quick start manual (34 pages) ,
- Engineering manual (17 pages)
Table of Contents
Advertisement
Renesas RA Family
MCK-RA6T2 Quick Start Guide
4.1.2
Connect the motor and the board
Connect the supplied inverter board, CPU board and motor following Figure 4-4. Also, turn off SW1 on the
inverter board and set VR1 to around the center. The motor is equipped with a Hall sensor signal cable, but
since the Hall sensor signal is not used for quick start operation, it does not need to be connected.
Figure 4-4 Hardware configuration
R12QS0047EJ0100 Rev.1.00
Page 9 of 18
August 18, 2021
Advertisement
Table of Contents
