How To Write Sample Project Into The Cpu Board; Connect Cpu Board To Pc - Renesas MCK-RA6T3 Quick Start Manual

Renesas RA Family MCK-RA6T3 Quick Start Guide

5. How to Write Sample Project into the CPU Board

In this product, sample projects can be written using the on-board debugger circuit (J-Link OB) on the CPU
board. This section describes the writing method using the integrated development environment e2studio.

(1) Connect CPU board to PC

Connect the CPU board to the PC using the USB cable included in this product.
Figure 5-1 Connecting to PC
R12QS0061EJ0100 Rev.1.00 Page 11 of 17
May 23, 2023