HIKVISION iDS-9664NXI-M8/X User Manual page 33

When the transmission distance reaches 100 to 250 meters, you must use the CAT5E or CAT6
●
network cable to connect with the PoE interface.
When the transmission distance reaches 250 to 300 meters, you must use the CAT6 network
●
cable to connect with the PoE interface.
3. Click Apply.
4. Connect PoE cameras to device PoE ports with network cables.
5. Go to Camera → Camera → IP Camera to view camera image and information.
Add Non-PoE Network Camera
You can disable the PoE interface by selecting the manual while the current channel can be used as
a normal channel and the parameters can also be edited.
Steps
1. Go to Camera → Camera → IP Camera .
2. Position the cursor on a window with no linked network camera and click
Network Video Recorder User Manual
Figure 1-12 Add PoE Camera
11
.