HIKVISION iDS-9664NXI-M8/X User Manual page 110

Comparison Failed Prompt
It will display the prompt in live view Target (with Facial Detection checked) or Facial
Recognition when face picture comparison failed. You can click
Recognition interface.
Comparison Succeeded Prompt
It will display the prompt in Facial Recognition when face picture comparison succeeded. You
can click in live view to enter person passing interface.
Enable Alarm Output Pulse
It is usually linked with a gate. When a person is passing a gate, if the comparison succeeded,
it will trigger a pulse to open the gate. The pulse is between 100 to 900 ms. You can set Alarm
Output Pulse (ms) in System → Event → Normal Event → Alarm Output .
9. Select face picture libraries and set similarity.
10. Set the arming schedule. Refer to Configure Arming Schedule .
11. Set the linkage actions when face picture comparison succeeded or failed. Refer to Configure
Linkage Actions .
12. Optional: Configure face grading parameters. Refer to Face Grading Configuration .
13. Click Apply to save the settings.
Configure Stranger Alarm
Compare detected face pictures with specified face picture library. Trigger alarm when comparison
failed.
Steps
1. Go to Smart Analysis → Smart Event Settings → Facial Recognition .
2. Select a camera.
3. Click Face Picture Comparison.
Network Video Recorder User Manual
88
in live view to enter Facial