Self-Learning; Training Task - HIKVISION iDS-9664NXI-M8/X User Manual

The analysis task of the camera is enabled. Device is waiting to analyze data.
Enabled
The analysis task of the camera is enabled and device is analyzing data of the camera.
5. Optional: For Non-Real-Time Face Picture Comparison analysis mode, click View Record to view
the progress of each day.

7.3 Self-Learning

This chapter is only available for certain models of perimeter protection events.

7.3.1 Training Task

Training task is used to improve perimeter protection alarm accuracy. After it is enabled, the device
would automatically collect training materials from perimeter protection events. When there are
enough materials, the device would run a round of training and update the algorithm at the preset
time.
Go to Smart Analysis → Self-Learning → Training Task to enable the function under Training Task.
Task Status
The task status for material collection. The progress would reach 100% when enough training
materials are collected.
Force Training
This function is mainly used for technical supports, and you are not recommended to use it. If
the collected materials are not enough, this function can force the device to run a round of
training for the current collected materials.
Auto Update
After a round of training is completed, the device would automatically update the algorithm
according to the preset time.
Note
Training Task is enabled by default.
●
Enabling Training Task would occupy one engine, so the number of available channels for smart
●
analysis may decrease.
When the algorithm is upgrading, the number of false alarms may currently be increased.
●
Network Video Recorder User Manual
Figure 7-3 Training Task
82