Task Configuration - HIKVISION iDS-9664NXI-M8/X User Manual

7.2 Task Configuration

You can view the task status in task configuration. Smart analysis results are used for filtering the
pictures when searching interested human body and vehicle pictures.
Before You Start
Check Save VCA Pictures for human body detection/vehicle detection, line crossing detection,
intrusion detection, region entrance, or region exiting.
Steps
Note
The chapter is only available for certain models of iDS series.
1. Go to Smart Analysis → Engine Settings → Task Configuration .
2. Check cameras to enable corresponding analysis mode. Ensure engine is available for the
selected analysis mode.
3. Enable auto analysis.
1) Click Edit.
2) Optional: Check Enable of Display Status and Notify Surveillance Center.
3) Set Start Time of video to analyze.
4) Click OK.
4. Check cameras and click Enabled to start analyzing.
Task status includes 3 conditions: Disabled, Waiting, and Enabled.
Disabled
No analysis task is enabled on the camera.
Waiting
Network Video Recorder User Manual
Figure 7-2 Auto Analysis
81