Human Body Detection - HIKVISION iDS-9664NXI-M8/X User Manual

2) Set Sensitivity. The higher the value is, the more easily the detection alarm will be triggered.
Its range is [0-100].
3) Click Draw Region and draw a quadrilateral in the preview window.
9. Optional: Draw the maximum size/minimum size for targets. Only the targets in the size ranging
from maximum size to minimum size will trigger line crossing detection.
1) Click Max. Size/Min. Size.
2) Draw an area in preview window.
3) Click Stop Drawing.
10. Optional: Select Detection Target as Human or Vehicle to discard alarms which are not
triggered by human or vehicle.
11. Set the arming schedule. Refer to Configure Arming Schedule .
12. Set linkage actions. Refer to Configure Linkage Actions .
13. Click Apply.

7.6 Human Body Detection

Go to Smart Analysis → Engine Settings → Engine Configuration . Configure at least one engine
usage as Picture Recognition-Human Body. Refer to Engine Configuration for details.
Go to Smart Analysis → Engine Settings → Task Configuration to enable the task for camera. For
details, refer to Task Configuration for details.
Note
The chapter is only available for certain models of iDS series.
7.6.1 Human Body Detection
The human body detection enables to detect the human body appearing in the monitoring scene,
and capture the human body pictures.
Before You Start
Ensure the connected camera supports the human body detection.
Steps
1. Go to Smart Analysis → Smart Event Settings → Other Events .
2. Select a camera.
3. Click Human Body.
4. Optional: For IP camera does not support human body detection, Check Enable Local Human
Body Detection. Then the device will consume its decoding resource to execute human body
detection. Before enabling the function, go to Smart Analysis → Engine Settings → Engine
Configuration to select at least one engine as Video Structuralization-Real-Time.
5. Check Save VCA Picture to save the captured pictures of human body detection.
Network Video Recorder User Manual
103