HIKVISION iDS-9664NXI-M8/X User Manual page 111

4. Select Mode as Stranger.
5. Optional: Check Enable Non-Real-Time Mode. For places with a high flow of people, the device
processing speed may not be fast enough, Non-Real-Time Mode will save the real-time pictures
as cache, and process them later when engine has free resource. After enabling this function, all
channels will be able to support face picture comparison.
Note
When Non-Real-Time Mode is enabled, the linkage method will only support Notify
●
Surveillance Center.
Non-Real-Time Mode will not trigger real-time alarm, so Arming Schedule is unavailable.
●
You can search the comparison event results in File Management → Smart Search → Face
●
Search → Search by Event .
6. Check Enable Stranger.
7. Optional: Check Save VCA Picture to save the captured pictures of VCA detection. After the face
picture comparison is enabled, the comparison results will be uploaded for face comparison
alarm. If the comparison produced a match, both the real-time face picture and the target
picture from the library will be uploaded. If no match is produced, the real-time face picture is
uploaded to center only.
Network Video Recorder User Manual
Figure 7-7 Face Picture Comparison
89