Dvd Player + Tv With A/V Input Jacks - RCA RC5210P User Manual

DVD Player + TV with A/V Input Jacks

(Better Picture and Sound Quality)
TV
AUDIO
VIDEO
L R
DVD
PLAYER
COAXIAL
DIGITAL
AUDIO OUT
AUDIO OUT
L
R
To Connect the DVD Player
1. Using A/V cables, connect the AUDIO OUT L & R jacks to
the corresponding audio inputs on the TV.
2. With a third A/V cable, connect the VIDEO OUT jack to the
corresponding video input on the TV (or the S-Video cable
if your television has an S-Video input).
Note:
• Your cable or off-air connection to the television should
not be affected by this connection. Connect as you
normally would to your television. (You may need to
consult your television manual for details.)
To Watch DVD
Tune your television to either the Video or S-Video input
channel. Consult your television manual for specific details.
S-VIDEO
OR
VIDEO S-VIDEO
OUT
OUT
DVD Player + TV with A/V Input Jacks
CABLE
OR
OFF-AIR SIGNAL
ANT IN
CAUTION
Do not stack electronic components or
other objects on top of the DVD player.
See Safety Information, inside front
cover.
Consult the owner's manuals of the
additional components you are
connecting for more detailed
connection information for those
particular components.
Setup and Connections 9