Loading And Playing An Audio Cd; Cd Information Display - RCA RC5210P User Manual

Loading and Playing an Audio CD

Loading and Playing an Audio CD
Before you load a disc, make sure that it is compatible with
the player. Note that the following discs CANNOT be used
with this player:
• Laserdisc
• CD-I, CD-ROM, CD-R, DVD-ROM
• MiniDisc
To Load and Play an Audio CD
Make sure that you have properly connected the DVD player
(see "Setup and Connections") before you begin.
1. Press OPEN•CLOSE or PLAY on the front of the DVD
player.
2. Place a disc gently into the tray with the disc's label
facing up.
3. Press the PLAY button to close the disc tray.
The DVD player reads the disc's table of contents, and
then begins disc playback.
4. Press STOP to stop playback.

CD Information Display

1. Press INFO on the remote to bring up the CD
information display.
2. Press INFO a second time to show the player information
display, and then a third to turn it off.
You can find additional details on the player
information display later in this section.
40 Playing Audio CDs
Time Counter
Track Number
Insert with the label facing up.