Table of Contents
Advertisement
Types of Discs That the Player Can Play
This DVD player is capable of playing the following types of
discs, having the corresponding logos:
• DVDs
• Audio CDs
• Video CDs
Prepare to Connect the DVD Player
Before you connect your DVD player, there are a few things
that you need to know.
Protect Your Components from Power Surges
•
Connect all components before plugging any power cords
into the wall outlet.
•
Always turn off the DVD player, TV, and other components
before you connect or disconnect any cables.
Position Cables Correctly to Avoid Audio Hum or
Interference
•
Insert all cable plugs firmly into their jacks.
•
Place the audio/video cables to the sides of the TV's back
panel instead of straight down the middle after you
connect your components.
•
Try not to coil any twin-lead cables and keep them away
from the audio/video cables as much as possible.
•
Make sure all antennas and cables are properly grounded.
DIGITAL VIDEO
Prepare to Connect the DVD Player
DO NOT Use CD-R Discs!
The wave length of the pickup of this
DVD player may cause CD-R discs to be
erased. DO NOT play CD-R discs in this
player!
CAUTION
Protect your components from
overheating.
• Do not stack electronic components
or other objects on top of the DVD
player.
• Do not block ventilation holes in any
of the components. Arrange the
components so that air can circulate
freely.
• Allow adequate ventilation when
placing your components in a stand.
See Safety Information, inside front
cover.
Setup and Connections 5
Advertisement
Table of Contents
