Table of Contents
Advertisement
Connections
&
Setup
TV
DVD
PLAYER
S-VIDEO
VIDEO IN
AUDIO OUT
R
L
AUDIO IN
R
L
CABLE
OR
OFF-AIR
SIGNAL
ANT IN
DVD Player + TV with Audio/Video
Input Jacks
1.
Connect the audio cables to the AUDIO OUT FRONT L (left - white) and R (right - red) jacks
on the back of your DVD Player, and to the corresponding
Audio Input jacks on your TV.
2.
Connect the video cable.
• Basle video connection
- Connect the video cable (yellow) to the VIDEO OUT jack on
the back of your DVD Player, and to the Video Input jack on your TV.
OR
• S-Video - (optional) If your TV has an S-Video Input jack, connect the S-Video cable to the
S-VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If
your TV doesn't have S-Video, use the basic video connection
listed above.
OR
• Component video (optional)
- If your TV has component
video (Y, Pn, and
PR
jacks) use
video-grade
cables for the Y, PB, and PR connections.
Note that it is essential to match the
color-coded
connectors
with a compatible
TV. If your TV doesn't have component
video,
use the basic video connection
listed above.
3.
Plug in the AC power
cord
into an AC outlet.
Note:
Your cable or off-air connection
to the television should not be affected by this
connection.
Connect your cable or off-air antenna
to your television as you normally
would.
You may need to consult your television manual for details.
Go to page
21
Chapter
1
9
Advertisement
Table of Contents
