Table of Contents
Advertisement
Unpacking the Box
Unpack the Box
Carefully unpack the items in the box:
•
DVD player
•
Remote control and batteries
•
Audio/Video cables
•
S-Video cable
•
Power cord
Install Batteries in the Remote
1. Open the battery door on the back of the remote.
2. Insert fresh batteries. Make sure that the polarities
(+ and –) are aligned correctly.
3. Replace the battery door.
Important Battery Information
•
If you're not going to use the remote for a month or more,
be sure to remove the batteries because they can leak and
cause damage.
•
Dispose of batteries in the proper manner, according to
federal, state, and local regulations.
•
Any battery may leak electrolyte if mixed with a different
battery type, if inserted incorrectly, if all batteries are not
replaced at the same time, if disposed of in fire, or if an
attempt is made to charge a battery not intended to be
recharged.
•
Discard leaky batteries immediately. Leaking batteries can
cause skin burns or other personal injury.
4 Setup and Connections
Advertisement
Table of Contents
