Dvd Player + Tv Without A/V Input Jacks - RCA RC5210P User Manual

DVD Player + TV without A/V Input Jacks

DVD Player + TV without A/V Input Jacks
(Good Picture and Mono Sound Quality)
TV
RF
Video
MODULATOR
(not included)
Audio (L)
"Y" ADAPTER
(not included)
DVD
PLAYER
COAXIAL
DIGITAL
AUDIO OUT
AUDIO OUT
L
VIDEO
OUT
R
To Connect the DVD Player
If you do not have audio/video input jacks on your television,
you need to use an RF modulator and A/V cable "Y" adapter
(not included).
1. Connect the "Y" adapter to the DVD player's AUDIO OUT
L & R jacks, and a standard A/V cable to the VIDEO OUT jack.
2. Connect the other ends of the cable and adapter to the
corresponding inputs on the RF modulator.
3. Connect the off-air antenna or your cable signal to the
antenna input on the RF modulator (if it has one).
4. Connect the output from the modulator to the antenna
input on your television.
To Watch DVD
Tune your television to RF modulator output channel (the
modulator should have a CH 3/4 switch to indicate the output
channel).
NOTE:
• You may need to adjust the A/B switch on the RF
modulator to watch television programming.
8 Setup and Connections
RF Out
Ant In
S-VIDEO
OUT
ANT IN
CABLE
OR
OFF-AIR SIGNAL
CAUTION
Do not stack electronic components or
other objects on top of the DVD player.
See Safety Information, inside front
cover.
Consult the owner's manuals of the
additional components you are
connecting for more detailed
connection information for those
particular components.