Changing The Audio Channel Output; Program Playback - RCA RC5210P User Manual

Changing the Audio Channel Output

If you are playing a stereo Video CD, you can change the
channel output from the player.
1. During disc playback, press INFO on the remote.
2. Use the right MOVE arrow to highlight the audio channel
output.
3. Use the up and down MOVE arrows to select an audio
channel (left, right, or stereo).
4. Press INFO twice to turn off the information display.

Program Playback

Program playback lets you set up a specific order for the
playback of tracks on a disc.
You must bypass Playback Control before you can program
tracks (see "Bypassing Playback Control" earlier in this section).
1. With the player in stop mode, press INFO on the remote
twice to bring up the player information display.
Player Information Display
2. Use the right MOVE arrow to highlight Playback Mode.
3. Use the up and down MOVE arrows to scroll through the
options:
Standard Playback
Program Playback
Random Playback
4. When the Program Playback icon is displayed, press OK.
Info
button
Playback Mode
Program Playback
POWER
REVERSE PLAY FORWARD
SKIP STOP PAUSE
MENU
Move
Arrow
buttons
GO BACK
INFO
1 2 3
4 5 6
7 8 9
0
Playing Video CDs 49
+
SKIP
GUIDE
OK
button
Number
buttons