Dvd Player + Tv With A/V Input Jacks; (And/Or S-Video) - RCA RC5910P User Manual

DVD Player + TV with A/V Input Jacks

(Better Picture and Sound Quality)
TV (BACK PANEL)
AUDIO VIDEO
L R
DVD PLAYER
OPTICAL COAXIAL
DIGITAL AUDIO OUT
To Connect the DVD Player
1. Using A/V cables, connect the ANALOG AUDIO OUT L & R jacks
to the corresponding audio inputs on the TV.
2. With a third A/V cable, connect the VIDEO OUT jack to the
corresponding video input on the TV (or the S-Video cable if
your television has an S-Video input).
Note:
• Your cable or off-air connection to the television should not be
affected by this connection. Connect as you normally would to
your television. (You may need to consult your television manual
for details.)
To Watch DVD
Tune your television to either the Video input or S-Video input
channel. See page 15 or consult your television manual for specific
details.
S-VIDEO OUT
ANT IN
OR
R1 L1 V1 Pr Y
R2 L2 V2
Pb
ANALOG AUDIO OUT VIDEO OUT S-VIDEO OUT COMPONENT VIDEO OUT
Setup and Connections
CABLE OR OFF-AIR SIGNAL
COMPONENT VIDEO OUT JACKS
Some newer televisions are equipped with
COMPONENT VIDEO jacks. These jacks
replace the S-Video jacks and it is preferable to
use them if you TV is so equipped. To hook up
the COMPONENT VIDEO jacks, connect the
cables to the same color-coded jacks. For more
information, please consult your TV Owner's
Manual.
CAUTION
Do not stack electronic components or other
objects on top of the DVD player. See Safety
Information, inside front cover.
Consult the owner's manuals of the additional
components you are connecting for more
detailed connection information for those
particular components.
9