Setting Up The Menu Language - RCA RC5210P User Manual

Setting Up the Menu Languages
Connect the AC Power Cord
After you have connected the components, you need to
connect the AC power cord. Connect the AC power cord to the
back of the DVD player and to an AC power outlet (AC120 V,
50-60 Hz).

Setting Up the Menu Language

By default, the player's menu language is set to English. If you
want to change the language, press MENU on the remote.
After plugging in the player, the first time you press the
button, this screen comes up:
Press the number on the remote corresponding to the
language of your choice.
Other Language Options
The Menu Language feature changes the language only for the
text on the menu screens. There are other language options
available for subtitling and audio.
For more information on these language options, see "Using
the Setup Menu" later in this manual.
12 Setup and Connections
1st
NOTE: Make sure that the plug is fully seated
in the DVD player.
2nd