Table of Contents
Advertisement
Connections & Setup
12
TV
S-VIDEO
VIDEO IN
2
DVD
PLAYER
OPTICAL
DIGITAL
AUDIO OUT
DVD Player + TV with Audio/Video Input Jacks
1. Connect the audio cables to the 5.1 CHANNEL AUDIO OUT L (left – white) and R (right – red) jacks
on the back of your DVD Player, and to the corresponding Audio Input jacks on your TV.
2.
Connect the video cable.
• Basic video connection – Connect the video cable (yellow) to the COMPOSITE jack on the back of
your DVD Player, and to the Video Input jack on your TV.
• S-Video (optional) – If your TV has an S-Video Input jack, connect the S-Video cable to the S-
VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If your TV
doesn't have S-Video, use the basic video connection listed above.
• Component video (optional, not shown in illustration) – If your TV has component video (Y, P
P
jacks) use video-grade cables for the Y, P
R
color coded connectors with a compatible TV. If your TV doesn't have component video, use the basic
video connection listed above.
Note: If you use this connection, you must change the Video Output in the Display
menu (see page 42). The default video output is S-video/Composite.
3. Connect the AC power cord into an AC outlet.
Note: Your cable or off-air connection to the television should not be affected by this connection.
Connect your cable or off-air antenna to your television as you normally would. You may need to
consult your television manual for details.
AUDIO OUT
R
L
AUDIO IN
L
R
1
COMPOSITE
SUBWOOFER
CENTER
1
Y
Y
SURROUND
COAX.
2
Pb
Pb
Pb
FRONT
MIXED
Pr
Pr
R
L
COMPONENT
PROG. SCAN
S-VIDEO
5.1 CHANNEL
VIDEO OUT
AUDIO OUT
OR
OR
, and P
B
OFF-AIR SIGNAL
ANT IN
connections. Note that it is essential to match the
R
CABLE
OR
, and
B
Go to page 18
Chapter 1
Advertisement
Table of Contents
