ADA INSTRUMENTS Cosmo 40 Operating Manual page 13

1 COSMO 40
The volume value will be displayed in the main display area and the previous area value is displayed in the
first line.
Indirect measurement
Pythagorean measurement is used in the condition that the objective needing to be measured is covered or
has no effective reflecting surface and can't be measured directly.
Make sure you adhere to the prescribed sequence of measurement:
All target points must be in a horizontal or vertical plane.
The best results are achieved when the instrument is rotated about a fixed point (e.g. with the positioning
bracket fully folded out and the instrument placed on a wall) or the instrument is mounted on a tripod.
The minimum / maximum function can be used. The minimum value must be used for measurements at right
angles to the target; the maximum distance for all other measurements.
The best results are achieved when the instrument is rotated about a fixed point (e.g. with the positioning
bracket fully folded out and the instrument placed on a wall) or the instrument is mounted on a tripod.