ADA INSTRUMENTS Cosmo 40 Operating Manual page 12

Laser distance meter

Table of Contents

Available languages

COSMO

Press button (1) to take the first measurement (for example, length). Press button (1) to take the second

measurement (for example, width).

After the completion of area, press button (1) , the result of addition/substraction of areas is displayed in

the main display area. If the measurements are not finished, press button (5) (addition) or (5) (substraction)

to continue calculations.

Volume

For volume measurements, press button (2) twice until the indicator for volume measurement appears on

the display.

Press button (1) to take the first measurement (for example, length). Measured value is displayed in the

second line.

Press button (1) to take the second measurement (for example, width). Measured value is displayed in the

second line. Area value is displayed in the first line.

Press button (1) to take the third measurement (for example, height). Measured value is displayed in the

second line.

Table of Contents

Chapters

Table of Contents

Do you have a question about the Cosmo 40 and is the answer not in the manual?