Table of Contents
Advertisement
Physical Descriptions
NetVanta 3450 Front Panel Design
The NetVanta 3450 front panel is shown below. Front panel LED descriptions are given in
WAN 1
WAN 2
ETH1
Status
DBU 2
ETH2
DBU 1
CONSOLE Interface
The
interface is an EIA-232 serial port (DCE) that provides for local management and
CONSOLE
configuration (via a DB-9 female connector).
Connection directly to an external modem requires a cross-over cable.
CompactFlash
The front panel contains a
storage. ADTRAN supports any industry standard 1 GB CompactFlash card. Refer to
CompactFlash Card on page
NetVanta 3450 Rear Panel Design
The NetVanta 3450 rear panel is shown below with a module installed.
pinouts.
SLOT 1 NET/DBU
NetVanta 3450 Rear Panel Interfaces
SLOT 1/SLOT 2 NET/DBU Option Slots
The
SLOT 1/SLOT 2 NET/DBU
option modules are described in the section
10/100Base-T Ethernet Interfaces
The Ethernet ports (
•
10Base-T or 100Base-T dual stacked connector
•
Auto-MDIX
•
Auto-negotiation
•
CSMA/CD
•
IEEE 802.3 compatibility
32
Figure 12. NetVanta 3450 Front Panel Layout
slot for nonvolatile configuration storage and compressed code
CompactFlash
76.
SLOT 2 NET/DBU
Figure 13. NetVanta 3450 Rear Panel Layout
option slots support various NIM plug-in option modules. These
and
) are RJ-45 connectors. These ports provide the following:
ETH 0/1
ETH 0/2
Copyright © 2019 ADTRAN, Inc.
CONSOLE
Option Modules on page
NetVanta 3200/3300/3400 Series
Table 1 on page
CompactFlash
Installing a
Appendix A on page 79
ETH 0/1
ETH 0/2
38.
61200860L1-34AE
37.
NetVanta 3450
provides
Advertisement
Table of Contents
