Table of Contents
Advertisement
Unit Installation
Using a USB Cellular Modem with the NetVanta USB WWAN NIM
The NetVanta USB WWAN NIM contains a Type A USB connector that supports a variety of third-party
USB cellular modems.
Visit the NetVanta USB WWAN NIM product page at
supported third-party USB cellular modems.
•
Always remove power from the unit prior to removing or installing a module.
•
Improper installation may result in damage to the modules.
Instructions for Installing a USB Cellular Modem in the USB WWAN NIM
Step
1
Remove power from the base unit.
2
Remove the cover from the base unit's option slot.
3
Slide the USB WWAN NIM into the option slot until the module is firmly seated against the
chassis.
4
Secure the pins at both edges of the module.
5
Restore power to the base unit.
6
Refer to the quick start guide that shipped with the NetVanta USB WWAN NIM for instructions
on obtaining a cellular account and activating your USB cellular modem.
An optional USB Locking Mechanism is available from ADTRAN (P/N 1700643G1) to
lock the USB to the NetVanta USB WWAN NIM.
72
Action
Copyright © 2019 ADTRAN, Inc.
NetVanta 3200/3300/3400 Series
http://www.adtran.com
61200860L1-34AE
for a list of
Advertisement
Table of Contents
