ADTRAN 1200821F1 Hardware Installation Manual page 5

Table of Contents

Advertisement

NetVanta 3200/3300/3400 Series
FCC-Required Information
FCC regulations require that the following information be provided in this manual:
1. This equipment complies with Part 68 of Federal Communications Commission (FCC) rules and
requirements adopted by America's Carriers Telecommunications Association (ACTA). Each
registered interface has a label that contains, among other information, a product identifier in the
format US:AAAEQ##TXXXX. If requested, provide this information to the telephone company.
2. If this equipment causes harm to the telephone network, the telephone company may temporarily
discontinue service. If possible, advance notification is given; otherwise, notification is given as
soon as possible. The telephone company will advise the customer of the right to file a complaint
with the FCC.
3. The telephone company may make changes in its facilities, equipment, operations, or procedures
that could affect the proper operation of this equipment. Advance notification and the opportunity
to maintain uninterrupted service are given.
4. If experiencing difficulty with this equipment, please contact ADTRAN for repair and warranty
information. The telephone company may require this equipment to be disconnected from the
network until the problem is corrected, or it is certain the equipment is not malfunctioning.
5. This unit contains no user-serviceable parts.
6. This equipment is designed to connect to the telephone network or premises wiring using an 
FCC-compatible modular jack, which is compliant with Part 68 and requirements adopted by
ACTA.
7. The following information may be required when applying to the local telephone company for
leased line facilities:
Part Number
Registration Number
1200861L1
US: HDCDENAN1200861L1
1202862L1
US: HDCDENAN1202863L1
1202863L1
1200872L1
US: HDCDENAN1200872L1
1200864L1
US: HDCMM04A1200864L1
1200865L1
US: HDCDENAN1200865L1
1202869E1
US: HDCDL01A1200869L1
8. The ringer equivalence number (REN) is useful in determining the quantity of devices you may
connect to your telephone line and still have all of those devices ring when your number is called.
In most areas, the sum of the RENs of all devices should not exceed five. To be certain of the
number of devices you may connect to your line as determined by the REN, call your telephone
company to determine the maximum REN for your calling area.
9. This equipment may not be used on coin service provided by the telephone company. Connection
to party lines is subject to state tariffs. Contact your state public utility commission or corporation
commission for information.
61200860L1-34AE
Service Type
56 kbps Digital Interface
64 kbps Digital Interface
1.544 Mbps - SF
1.544 Mbps - SF and B8ZS
1.544 Mbps - ESF
1.544 Mbps - ESF and B8ZS
Analog Loop Start
Basic Rate ISDN
ADSL, ADSL2, ADSL2+ Modem
Copyright © 2019 ADTRAN, Inc.
FCC-Required Information
REN/SOC
FIC
6.0F
04DU5-56
04DU5-64
04DU9-BN
04DU9-DN
6.0N
04DU9-1KN
04DU9-1SN
0.4A/9.0Y
02LS2
6.0F
02IS5
0.1A
Metallic
USOC
RJ-48S
RJ-48C
RJ-11C
RJ-49C
RJ-11C
5

Advertisement

Table of Contents
loading

Table of Contents