Bypass Groups - DSC neo HS2128 E User Manual

Chapter
4
3. Press [9][9][9]
OR
Scroll to Bypass Options and press [*]. Scroll to Bypass Recall using
the scroll keys and press [*].
4. To exit bypassing mode press [*].
5. If using an LED or ICN series keypad, the
bypassed zone #s will be shown. If the system is ready to arm the
Ready indicator will be lit. When arming the system the following
message briefly displays.
To clear the bypass indication from all zones:
1. Press [*] to enter the function menu.
2. Press [*] or [1]. If required enter your [access code].
3. Press [0][0][0]
OR
Scroll to Clear Bypasses using the [<][>] keys and press [*]. All
bypassed zones will now be open.
4. To exit bypassing mode press [*].

4.9 Bypass Groups

Program frequently bypassed zones into the system as a bypass group. Using bypass groups avoids indi-
vidually bypassing each zone. One bypass group can be programmed per partition.
NOTE: This feature is not to be used in UL listed installations.
To program a Bypass Group:
1. Press [*] to enter the function menu.
2. Press [*] or [1]. If required enter your [access code].
3. Enter the 3 digit zone # of the zones you want bypassed
OR
Scroll to and press [*] to indicate all zones you want bypassed.
4. Press [9][9][5] to program the bypass group with the currently
bypassed zones
OR
Scroll to Bypass Options using the scroll keys and press [*]. Scroll to
Prg Bypass Group and press [*].
5. The Bypass Group is now programmed. The keypad will beep three
times.
6. To exit bypassing mode and return to the Ready state, press .
To load a Bypass Group:
1. Press [*] to enter the function menu.
2. Press [*] or [1]. If required enter your [access code].
will light and the
- -
15
Press (*) for <>
Bypass Recall
then
Bypass Recalled
Zones Bypassed
* Warning *
Bypass Active
LCD Display
Press (*) for <>
Zone Bypass
Zone Bypass <>
(*) To Bypass
Press (*) for <>
Clear Bypasses
then
Bypass Cleared
Zones Unbypassed
LCD Display
Press (*) for <>
Zone Bypass
Scroll to <>
Bypass Zones
Upstrs H Wdw <>
B
Press (*) for <>
Prg Bypass Group
Bypass Group
Programmed
System is
Ready to Arm
LCD Display
Press (*) for <>
Zone Bypass
Scroll to <>
Bypass Zones