Assigning A Partition To A User Code; Configuring Additional User Options - DSC neo HS2128 E User Manual

Chapter
7

7.1.5 Assigning a Partition to a User code

User codes can be configured to have access only to specific partitions. For more information see:
"Managing Partitions".
NOTE: Partitions are configured by your installer.
To assign a partition to a User Code:
1. From the desired user press [4] or scroll to Partition Assign and press
[*].
2. Press [*] to change the partition assignment for the user code, Y or N.
If using an LED or ICON keypad press the corresponding number
key for the partition, 1 to 8, to change the programming of the option.

7.2 Configuring Additional User Options

Users can also be assigned the following options:
[1] Supervisor Code
[2] Duress Code
[3] Zone Bypass
[4] Remote Access
[7] Bell Squawk
[8] One Time Use
To configure additional user options:
1. At desired user press [5] or scroll to User Options and press [*].
2. Use the keys to cycle through the User Options and press to toggle
configuring the displayed option.
OR
If using an LED or ICN keypad press the [feature number as listed
above].
For more information see: "Access Code Types".
For more information see: "Access Code Types".
Grants the user the ability to bypass zones.
Grants the user the ability to use SMS features. For more information see:
"SMS Command and Control"
Use to generate a bell squawk when arming/disarming the system.
When using wireless keys to arm/disarm the system there will be:
one bell squawk for arming
l
two bell squawks for disarming.
l
three squawk pairs when disarming with an alarm in memory.
l
For more information see: "Access Code Types".
- -
27
LCD Display
Press (*) for <>
Partition Assign
(*) To Toggle <>
{Partition Lb} Y
LCD Display
Press (*) for <>
User Options
(*) To Toggle <>
Bell Squawk Y