Managing Users; Access Code Types - DSC neo HS2128 E User Manual

Chapter
7

7.0 Managing Users

Different user access codes can be programmed in the PowerSeries Neo. The maximum number of user
access codes are as follows:
48 for HS2016/HS2016-4
l
72 for HS2032
l
95 for HS2064/HS2128
l
500 for HS2064 E
l
1000 for HS2128 E
l
Each user access code can be:
Uniquely labeled.
l
Assigned a proximity tag. In order to operate, proximity tags must be enrolled in the system.
l
Assigned to only operate specific partitions. For more information on partitions see: "Managing
l
Partitions".
Configured with additional attributes. For more information see: "Configuring additional User
l
Options".
NOTE: Your installer configures all access codes to be either 4, 6, or 8 digits. You cannot have access
codes of all lengths on your system.
Programed zones are indicated on the LCD screen. For more information on user flags see the following
table. On an ICN or LED keypad programmed users will have their digits displayed
User Indications
LCD Display Indications Description
User Code 0 1 - -
User Code 0 1 P P
User Code 0 1 T T

7.1 Access Code Types

The alarm system provides the following user access code types:
Code Add User
Master All
User No
Supervisor All but Master
Duress No
One-time user No
Installer and Master code are system codes that can be changed but not deleted. The other codes are
user-defined and can be added or deleted as necessary. By default, access codes have the same par-
tition and attribute programming as the code used to program them.
NOTE: When using 8-digit access codes, the minimum number of variations are:
2083333 for HS2016/HS2016-4
l
1388888 for HS2032
l
1052631 for HS2064/HS2128
l
200000 for HS2064 E
l
100000 for HS2128 E
l
Additionally, there are no disallowed codes.
Master By default the master code can access all partitions and can perform any keypad function.
Code
This code can be used to program all access codes, including the supervisor and duress
codes. The master code is code # [01].
User This type of access code is used to arm and disarm assigned partitions and can access the
Codes
User Functions menu.
Unprogrammed code
Programmed code
Code and tag/key are programmed
Delete User Arm Disarm Access Codes
All Yes Yes
No Yes Yes
All but Master Yes Yes
No Yes Yes
No Yes 1/day
- -
24
User Functions
Yes Yes
No No
Yes Yes
No No
No No
Installer
No
No
No
No
No