Recalling Bypassed Zones; Bypass Groups - DSC Security System Power 864 User Manual

Recalling
To recall the last set of bypassed zones:
Bypassed
1. Press
Zones
2. Press
3. To exit bypassing mode and return to the Ready state, press
Bypass
A Bypass Group is a selection of zones programmed into the system. If you bypass a group
of zones on a regular basis, you can program them into the Bypass Group, so that you do
Groups
not have to bypass each zone individually every time. One Bypass Group can be pro-
grammed on each partition.
To program a Bypass Group:
1. Press
2. Enter the two-digit numbers (01-64) of the zones to be included in the Bypass Group.
3. To save the selected zone into the group, press
4. To exit bypassing mode and return to the Ready state, press
To select a Bypass Group when arming the system:
1. Press
2. Press
3. To exit bypassing mode and return to the Ready state, press
NOTE:
gramming the bypass group..
16
, then your [access code] (if necessary).
.
, then your [access code] (if necessary).
On LCD5500Z keypads, you can also use the
included in the bypass group, and then press
, then your [access code] (if necessary).
. The next time the system is armed, the zones in this group will be
bypassed.
Bypass Groups are only recalled if the system is armed/disarmed after pro-
.
keys to find the zone to be
to select the zone.
.
.
.