Sms Responses From Your System - DSC neo HS2128 E User Manual

Chapter
6
Activate Command Output 3
Activate Command Output 4
Deactivate Command Output 1
Deactivate Command Output 2
Deactivate Command Output 3
Deactivate Command Output 4
Bypass 001
Unbypass 001
Status Request
Alarm Memory Request
Help

6.3.4 SMS Responses from your System

SMS responses are sent to the phone that initiated the command.
System Response Notes
Successful
Sent when a command and control function is successfully performed by the
panel.
Unsuccessful Sent when a command and control function not successfully performed by the
panel.
Invalid Command Sent when a command sent was not accepted as valid by the system.
System Stay Armed
Sent in response to a status request and if a partition is stay armed.
System Away Armed Sent in response to a status request and if a partition is away armed.
System Night Armed Sent in response to a status request and if a partition is night armed.
System Disarmed Ready Sent in response to a status request and if a partition is disarmed and ready to
arm.
System Disarmed Not Sent in response to a status request and if a partition is disarmed and is not
Ready
ready to arm.
System is in Alarm Sent in response to a status request and if a partition is in alarm.
Service is Required
Sent in response to a status request and if a partition is in trouble.
No Alarm Memory Sent in response to a alarm memory request and there are no alarms in
memory.
Activates Output 3
Activates Output 4
Deactivates Output 1
Deactivates Output 2
Deactivates Output 3
Deactivates Output 4
Bypasses specified zone number
Clears the bypass from the specified zone number
Omitting the partition number causes the system to send a
status report for all partitions. To request a status report for
a specific partition enter the appropriate partition number.
Omitting the partition number causes the system to send a
status report for all partitions. To request a status report for
a specific partition enter the appropriate partition number.
The Help command generates an SMS response listing all
Interactive commands that can be sent to the module.
Access Code is not required.
- -
23