Fish Id+™ (Setting Saved In Memory); Bottom View (Setting Saved In Memory) - Humminbird PiranhaMAX Portable 150 PT Installation And Operation Manual

Make sure that the SetUp menu is selected, then press the POWER-MENU key
until FISH ID+ TM
view Fish symbols. Fish ID+
sonar returns, and will display a Fish Symbol when very selective requirements
are met. A select number of possible fish returns will be displayed with their
associated depth. (On, Off, Default = On)
Scroll through all SetUp menu choices to exit the SetUp menu.
NOTE: Returns from the 200 kHz narrow beam are shown with shaded fish symbols
while the 83 kHz wide beam returns are displayed with hollow fish symbols.
NOTE: Hollow fish symbols are not available on 200 kHz Single Beam sonar units.
Make sure that the SetUp menu is selected, then press the POWER-MENU
key until BOTTOM VIEW appears. Bottom View selects the method used to
represent the bottom and structure on the display. (Structure ID, Black,
WhiteLine, Inverse, Default = Inverse)
Scroll through all SetUp menu choices to exit the SetUp menu.
Fish ID+
(Setting Saved in Memory)
appears. Select either Off to view "raw" sonar returns or On to
TM uses advanced signal processing to interpret
Raw Sonar,
Fish ID+ TM
Off
Raw Sonar,
Fish ID+ TM
Off
Bottom View (SetUp Menu)
(Setting Saved in Memory)
TM (SetUp Menu)
200 kHz
Narrow beam,
Fish ID+ TM On
200 kHz
Narrow beam,
Fish ID+ TM On
25
83 kHz
Wide beam,
Fish ID+ TM On