Attaching The Portable Case To The Boat - Humminbird PiranhaMAX Portable 150 PT Installation And Operation Manual

3. Turn the portable case around so
that you can access the back, and
open the back zipper. Connect the
spade clip on the red wire of the
power cable to the red terminal on
the battery, and the spade clip on
the black wire of the power cable
to the black terminal on the
battery. Make sure that the spade
clips are snugly attached to the
terminals (see the illustration
Connecting the Spade Clips).
4. Make sure the back battery door
and side pockets are zipped, but
leave the front of the bag unzipped
for easy access during installation.
2.

Attaching the Portable Case to the Boat

1. Attach the portable case to a surface on the boat by threading rope or
bungee cord (not provided) through the D-rings on either side of the
portable case.
NOTE: Humminbird® recommends that you do NOT position the portable case on the
bottom of the boat, or in a location where it can be splashed by or immersed in water,
as the portable case is water resistant, but not waterproof.
Connecting the Spade Clips
13