Setup Menu (Setting Not Saved In Memory); Contrast (Setting Saved In Memory); Fish Id+ (Setting Saved In Memory) - Humminbird PiranhaMAX 155 Installation And Operation Manual

Press the POWER-MENU key until Setup appears. Press the RIGHT Arrow key
to select On. (Off, On, Default = Off)
When you activate Setup, additional menu choices will become available that
are not a part of the Main Menu system. After selecting Setup, press the
POWER-MENU key to display the Setup menu choices, one at a time. Setup
Menu choices include:
• Contrast
• Fish ID+
• Bottom View
Scroll through all Setup menu choices to exit the Setup menu.
Make sure that the Setup menu is selected, then press the POWER-MENU key
until CONTRAST appears. Select a setting from 1 through 5. (1 to 5, Default = 3)
Make sure that the Setup menu is selected, then press the POWER-MENU key
until FISH ID+ appears. Select either Off to view "raw" sonar returns or On to
view Fish symbols. Fish ID+ uses advanced signal processing to interpret sonar
returns, and will display a Fish Symbol when very selective requirements are
met. A select number of possible fish returns will be displayed with their
associated depth. (On, Off, Default = On)
Raw Sonar,
Fish ID+ Off
NOTE: Returns from the 200 kHz narrow beam are shown with shaded fish symbols,
while the 83 kHz wide beam returns are displayed with hollow fish symbols.
Setup Menu
(Setting Not Saved in Memory)
• Battery Alarm
• Language (International only)
• Units (International only).
Contrast (Setup Menu)
(Setting Saved in Memory)
Fish ID+ (Setup Menu)
(Setting Saved in Memory)
200 kHz
Narrow beam,
Fish ID+ On
47
83 kHz
Wide beam,
Fish ID+ On
The Menu System