Cable The Base Enclosure Appliance To Switches; Connect Power Cables; Discover Your System - Dell PowerStore 1000 Installation And Service Manual

Cable the base enclosure appliance to switches

For switch cabling information, refer to the PowerStore Networking Guide for PowerStore T Models or PowerStore Networking
Guide for PowerStore X Models.
NOTE: Do not connect the power cables until you have completed network configuration.

Connect power cables

Prerequisites
If you are also installing an expansion enclosure, wait to power up the base enclosure until after you have cabled the expansion
enclosure.
Steps
1. Plug each power cable into the base enclosure power supply.
Figure 3. Inserting the power cable
2. Connect the other end of the power cable to the power distribution unit (PDU) on the rack.
Figure 4. Connecting to the PDU
After you connect the power cables, the base enclosure automatically starts up.

Discover your system

Once you have completed installing your base enclosure and optional expansion enclosures, discover your newly installed
enclosure.
Refer to PowerStore Networking Guide for PowerStore T Models or PowerStore Networking Guide for PowerStore X Models
for details.
14 Install a new base enclosure and an optional expansion enclosure