Table of Contents
Advertisement
Figure 127. Installing the node
4. Reconnect the back-end cables and the cables to the I/O modules and network ports.
5. Pull the orange release trigger and push in gently to re-engage the locking mechanism.
If the black release tab comes out when pulled, the locking mechanism is not engaged.
6. Plug in the power cable.
Verify the operation of a replacement internal M.2 boot module
Steps
1. From PowerStore Manager, select Hardware.
2. Select the appliance where you replaced the internal M.2 boot module.
3. On the Components card, under Internal View, expand the node that includes the internal M.2 boot module, and then
select the relevant InternalM.2BootModule.
The status of the replacement internal M.2 boot module should read Healthy. If the status is still Faulted, wait a few
minutes and refresh PowerStore Manager. If the status does not change, ensure that the internal M.2 boot module is
correctly seated, or contact your service provider.
Return a faulted part
About this task
For US customers, return defective material within five business days. For International customers, return defective material
within 10 business days. The materials required to return your defective part are supplied with the good part shipment.
Steps
1. Package the faulted part in the shipping box that contained the replacement part.
2. Ship the failed part to your service provider as described in the instructions that were included with the replacement part.
3. For more information about returning customer-replaceable parts:
a. Open PowerStore Manager.
b. Click Settings on the upper right of the screen.
c. Click General Support.
d. Under Drives, Power Supplies, and Other Parts, click Return Part.
e. If your screen does not show the Return Part link, contact your service provider for instructions.
108
Base enclosure service procedures
Advertisement
Table of Contents
