Installation; Dimension Drawings; Installation Proposal - Chicago Pneumatic CPVS 95 Instruction Book

Instruction book
4

Installation

4.1

Dimension drawings

CPVS 100 and CPVS 120 air-cooled compressors
See document 9820 6706 09 on the CD supplied with your machine
CPVS 100 and CPVS 120 water-cooled compressors
See document 9820 6706 15 on the CD supplied with your machine
CPE 150 and CPVS 150 air-cooled compressors
See document 9820 7100 60 on the CD supplied with your machine
CPE 150 and CPVS 150 water-cooled compressors
See document 9820 7100 50 on the CD supplied with your machine
Text on drawings
Compressor cooling air outlet
Compressor cooling air inlet
Compressed air outlet
Electrical cable passage
Cubicle cooling air outlet
Doors fully open
Cooling water outlet
Cooling water inlet
Prepared for manual drain
Dryer cooling air inlet
Dryer cooling air outlet
Centre of gravity
Mass
Type
4.2

Installation proposal

Outdoor/altitude operation
2920 7101 51
The compressor is not designed for installation outdoors.
Also, if the ambient temperature can fall down below 0 ˚C (32 ˚F), and if operating above
1000 m (3300 ft) precautions must be taken. In this case, , consult your supplier.
Translation or Explanation
Cooling air outlet of compressor and motor
Cooling air inlet of compressor and motor
Compressed air outlet connection
Electrical cable passage
Cubicle cooling air outlet
Dimensions with doors fully open
Cooling water outlet connection
Cooling water inlet connection
Prepared for manual drain
Dryer cooling air inlet
Dryer cooling air outlet
Centre of gravity
Mass of the machine
Machine type
57