Table of Contents
Advertisement
motor and the compressor is achieved. The TEFC motor ensures motor efficiency
for the life of the compressor.
INLET BAFFLES
The inlet baffles reduce inlet air velocity, allow the compressor to be installed next to
a wall which reduces the levels of airborne contamination entering the package and
lowers overall maintenance costs.
EASY MAINTENANCE
The CHICAGO PNEUMATIC CPVS 20-30 is designed so that all the major internal
parts are easily accessible for rapid maintenance operations. For the replacement
and/or the tightening of the belts, only the fixed protection has to be removed. To
replace the suction filter just remove the cover and replace the filter element. The
particular construction of the cover allows this operation even if a warm air duct is
installed, without removing any other component. The external filter panel can be
easily removed from its position for period cleaning. For the discharge of the
condensate of the oil separator, the topping off of the oil and/or replacement of oil,
only the front panel needs to be removed. For the replacement of the oil filter and of
the air-oil separator filter only the cover and the front panel should be removed.
AIR DUCTING
The CHICAGO PNEUMATIC CPVS 20-30 is designed to allow easy installation of
both the incoming and the outgoing via ductwork. The incoming air can be conveyed
on the right side of the machine without creating any interference with any
component of the compressor. The outgoing air can be conveyed by the upper side
of the machine and this does not interfere with the normal maintenance operation of
the machine.
HANDLING
- THREE points accessible for the handling
- Possibility to use both a hand pallet as well as a forklift
- Distribution of the lifting points is in line with the center of gravity
- Lifting points provide easy handling after removal from the transport pallet
INSTALLATION
The compressor-motor assembly is assembled on the frame of the machine by
means of flexible supports which allow the installation of the compression unit to be
directly onto a stable, flat surface without need of further anti-vibration provisions.
The self-supporting cabinet does not request any floor fastening bolt or device,
although it is recommend that the compressor be mounted to a stable fixture to
reduce vibration transmission.
For the installation, only the following connections need to be performed:
- Connection to the electric network:
- Connection to the compressed air use network
CPVS 20-30 Product Description
Hide quick links:
Advertisement
Table of Contents
