Modifying The Setpoint - Chicago Pneumatic CPVS 95 Instruction Book

Instruction book
(6)
• The screen shows the actual unloading and loading pressure settings for both pressure bands.
To modify the settings, move the cursor to the action button Modify and press the Enter key.
Following screen appears:
• The first line of the screen is highlighted. Use the Scroll keys to highlight the setting to be modified
and press the Enter key. Following screen appears:
• The upper and lower limit of the setting is shown in grey, the actual setting is shown in black. Use the
↑ or ↓ key of the Scroll keys to modify the settings as required and press the Enter key to accept.
If necessary, change the other settings as required in the same way as described above.

3.12 Modifying the setpoint

Menu icon, Setpoint
Function
On compressors with a frequency converter driven main motor, it is possible to program two different
setpoints. This menu is also used to select the active setpoint.
Procedure
Starting from the Main screen,
• Move the cursor to the action button Menu and press the Enter key.
• Highlight the action key Menu using the Scroll keys. Following screen appears:
2920 7101 51
Modify
37