Instruction book
7
Adjustments and servicing procedures
7.1
Air filter
1. Never remove the element while the compressor is running.
2. For minimum downtime, replace the dirty element by a new one.
3. Discard the element when damaged.
Procedure
1. Stop the compressor. Switch off the voltage.
2. Release the snap clips of air filter (AF) and remove the dust trap and the air filter element. Clean the
trap. Discard the filter element.
3. Fit the new element and the cover.
4. Reset the air filter service warning.
For compressors equipped with an ES 4000 Advanced regulator, see section
2920 7101 51
IMPORTANT
If you do not replace the filtering element when needed, permanent dirt build-up will
result. This reduces the air inflow to the compressor and could damage the oil separator
and the compressor.
Position of air filter
Service
menu.
75