Taking Out Of Operation - Chicago Pneumatic CPVS 95 Instruction Book

5.7

Taking out of operation

Procedure
Step Action
- Stop the compressor and close the air outlet valve.
- Switch off the voltage and disconnect the compressor from the mains.
- If available, open the condensate drain valve(s) (Dm).
- Shut off and depressurise the part of the air net which is connected to the outlet valve.
Disconnect the compressor air outlet pipe from the air net.
- On water-cooled compressors:
- Drain the oil.
- Drain the condensate circuit and disconnect the condensate piping from the condensate net.
70
• Isolate and disconnect the water system from the cooling water net.
• Drain the water circuit.
Instruction book
2920 7101 51