Ndi Decoder/Encoder - RGBlink TAO 1pro-S User Manual

In the [ PTZ Control ] menu, there are six Views to be selected. After selecting the View, you should first click [Save]
and then [Load].
If you would like to change the default setting, then click [ View 1 ] and adjust the location and zoom manually or
you can turn on [ Auto].
When [ PTZ Control ] is operated, the border of the interface displays TALLY of PTZ (shown as above). Red border
indicates PTZ has been operated; green border indicates connected status of PTZ, but PTZ has not been operated.
Click [ Tally Control ] to choose whether to enable the function. 3 kinds of frame pixel for you to choose from:
mini (10 pixel), mid (20 pixel), max (30pixel). Port Number and IP Address can not be modified.

3.2.5 NDI Decoder/Encoder

Click [NDI Decoder/Encoder] to enter the setting page.
NDI Decoder
Resolution: up to 1920x1080@60
Bitrate: 41000HZ
NDI Type: NDI|HX
NDI Encoder
NDI Channel Name: Edit the name of NDI channel. After setting, click [Enter] to save.
© Xiamen RGBlink Science & Technology Co., Ltd.
18
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com