Ndi Decoding Area/Hdmi Output - RGBlink TAO 1pro-S User Manual

Input Signal Status ( Applicable to this user manual)：
1. --no input signal source
2. --with signal source but not be selected
3. --enabled signal source
NDI Status ( Applicable to this user manual)：
1. --no input signal source
2. --with input signal source but not be selected
3. --enabled signal source
4. + --encoding/decoding/HDMI output function be enabled

3.1.2 NDI Decoding Area/HDMI Output

Users can switch decoding function and HDMI output function in the right corner of interface.
3.1.2.1 NDI Decoding Area
If you need to perform NDI Decoding mode, please follow the steps below.
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com
14