RGBlink TAO 1pro-S User Manual page 16

1）If DHCP function is closed, you need to set the network of TAO 1pro-S to be the same as decoding NDI source.
（Please refer to 3.2.3 Network for operation.）
2）If DHCP function is operated, please connect TAO 1pro-S to a switcher with IP distribution function. Then TAO
1pro-S can search for NDI sources automatically.
Click [Search] for NDI source selection.
[NDI Searching] in the interface displays its searching status and NDI source list will be shown after searching is
completed.
TAO 1pro-S supports preselection of up to four NDI sources at the same time. Choose signal sources you need and
then click [Confirm].
Users can also click [MORE] in the NDI source interface for re-search.
3.1.2.2 HDMI Output
You can choose the signal to be converted from four input sources (HDMI/SDI/UVC1/UVC2), and the input signal
will be converted to HDMI output format.
© Xiamen RGBlink Science & Technology Co., Ltd.
15
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com